SEC of America, with headquarters in the Research Triangle near Durham, North Carolina, is the United States affiliate of Shinkawa Electric Co. Ltd. of Japan, and provides sales, service and support for SEC products. Shinkawa is recognized as a global leader in rotating equipment condition monitoring, protection, and analysis.
ZARK vibration monitoring with Spark vibration monitoring software.
At Flare Labs we created a Plant Reliability Ecosystem that customers use to drive dollars to the bottom line. It’s called Machine Dossier and it allows Maintenance Professionals to interact with each other and their machines to collaboratively solve problems. Vibration data is collected by wireless devices, called ZARKs, mounted to critical machines and communicating with the cloud or local software. When the fitness of a machine is suspect, notifications are sent to your mobile device or network and the Spark process begins so you can collaborate with experts in the Reliability Collective to analyze and solve the problem.
- Wi-Fi 802.11 b/g with WPA-2
- Secure and fast
- Triaxial MEMS Accelerometer
- One ZARK per bearing
- Powerful onboard processing abilities
- Unlike a sensor, the ZARK thinks for itself
- 5700mAh Lithium Ion battery
- Powerful, long lasting and rechargable
- Magnetically- activated
CM-100 Accelerometer
- AC acceleration output via 2 Pin MS Connector
- Industrial Vibration Sensor
- Mounted Base Resonance 1080 – 1680kcpm
- Sensitivity 10 – 500mV/g
- Frequency Response 120cpm (2Hz) to 600kcpm (10kHz) ± 5%
- Electrical Noise 0.1mg max
- Current Range 0.5mA to 8mA
- Operating Temperature Range -67 to 284°F
- Sealing IP68
CM-100SF Accelerometer
- AC acceleration output via 2 Pin MS Connector
- Industrial Vibration Sensor
- Mounted Base Resonance 1020- 1620kcpm
- Sensitivity 10 – 500mV/g
- Frequency Response 90cpm (1.5Hz) to 600kcpm (10kHz) ± 5%
- Electrical Noise 0.1mg max
- Current Range 0.5mA to 8mA
- Operating Temperature Range -67 to 284°F
- Sealing IP68
CM-170 Premium Accelerometer
- AC acceleration output via 2 Pin MS Connector
- Industrial Vibration Sensor
- Mounted Base Resonance 1440- 2040kcpm
- Sensitivity 10 – 500mV/g
- Frequency Response 90cpm 120cpm (2Hz) to 840kcpm (14kHz) ± 5%
- Electrical Noise 0.1mg max
- Current Range 0.5mA to 8mA
- Operating Temperature Range -67 to 266°F
- Sealing IP68
CM-420 Accelerometer
- 4-20mA velocity output via 2 Pin MS Connector
- Industrial Vibration Sensor
- Mounted Base Resonance 5kHz min
- Velocity Ranges Nominal 80Hz at 72°F
- Frequency Response 600cpm (10Hz) to 60kcpm (1kHz) ± 5%
- Range 50g peak
- Current Output 4-20mA DC proportional to Velocity Range
- Supply Voltage 15-30 Volts DC (for 4-20mA)
- Operating Temperature Range -13 to 194° F
- Sealing IP68
HS-100I Industrial Accelerometer
- Intrinsically Safe, Oil Resistant & Submersible Integral Cable
- Mounted Base Resonance 18kHz (nominal)
- Sensitivity 100 mV/g ±10% Nominal 80 Hz at 71°F (22°C)
- Frequency Response 0.8 Hz to 10 kHz ±5%
- Electrical Noise 0.1 mg max
- Current Range 0.5 mA to 8 mA
- Submersible Depth 328 ft (100m)max (10 bar)
- Sealing IP68
HS-420I
- Intrinsically Safe, Braided Integral Cable
- 4-20mA Velocity Transducer
- Mounted Base Resonance 5 kHz min.
- Velocity Ranges 1 ips (25 mm/s) RMS ±10% Nominal 80 Hz at 71°F
- Frequency Response 10 Hz to 1 kHz ±5% – ISO10816
- Measurement Range 50 g peak
- Output Current 4-20 mA DC proportional to RMS velocity
- Supply Voltage 15 – 30 Volts DC (for 4-20 mA)
- Sealing IP65
